Philmac Repair Coupling (no stop) IPS-OD (ASTM D3035)

Philmac Repair Coupling (No Stop) IPS-OD (ASTM D3035)

The Philmac Repair Coupling (No Stop) IPS-OD (ASTM D3035) is designed for repairing and joining HDPE/polyethylene water lines where a standard coupling may be difficult to install. Unlike a standard coupling, the no-stop design allows the fitting to slide completely over the pipe, making it much easier to repair a damaged section of an existing water line.

This is an especially useful fitting for livestock watering and rotational grazing systems, where buried or established HDPE lines may need to be repaired without having enough movement in the pipe to install a traditional coupling.

Key Features

No Internal Stop: Allows the coupling to slide completely over compatible HDPE pipe for easier repair installation.

Designed for Water-Line Repairs: Excellent for replacing damaged sections of existing HDPE/polyethylene pipe.

Compression × Compression: Provides a secure mechanical connection on both ends.

230 PSI Rated: Suitable for water systems operating at pressures up to 230 PSI.

NSF 61 Certified: Suitable for potable water applications.

ASTM D3035 IPS-OD Compatible: Designed for compatible IPS-OD polyethylene pipe manufactured to ASTM D3035.

No Glue or Heat Fusion: Compression connections eliminate the need for solvent cement or specialized fusion equipment.

Ideal for Existing Water Lines: Particularly useful when the installed pipe has limited movement and cannot easily be pulled apart for a standard coupling.

Specifications

Brand: Philmac
Product Type: No-Stop Repair Coupling
Connection: Compression × Compression
Design: No Internal Stop / Slide-Over
Pipe Compatibility: IPS-OD HDPE/Polyethylene Pipe
Pipe Standard: ASTM D3035
Maximum Pressure: 230 PSI
Certification: NSF 61
Application: HDPE Water-Line Repair
Sold As: Each

Common Applications

• Repairing damaged HDPE water lines
• Livestock watering systems
• Rotational grazing water systems
• Buried pasture water lines
• Water trough supply lines
• Irrigation systems
• Farm water distribution
• Existing HDPE pipe installations

Why Use a No-Stop Repair Coupling?

A standard coupling has an internal stop that limits how far the pipe can enter the fitting. The Philmac No-Stop Repair Coupling can slide farther over the pipe, allowing you to position the fitting out of the way while replacing a damaged section.

Once the replacement pipe is positioned, the coupling can be slid back over the joint and tightened. This makes repairs much easier when working with fixed or buried water lines that have very little flexibility or movement.

Installation Tip

Cut out the damaged pipe section and make sure the remaining pipe ends are square, clean, and free from damage. Because this coupling has no internal stop, carefully center the coupling over the repaired joint before tightening the compression connections.

Use Summary

The Philmac Repair Coupling (No Stop) IPS-OD (ASTM D3035) is a valuable fitting to keep on hand for pasture water-line repairs. Its slide-over no-stop design, 230 PSI rating, and NSF 61 certification make it an excellent solution for repairing established HDPE water systems where installing a traditional coupling would be difficult.